Adhesive, Sealant and Paint Application Equipment Rebuild and Repair

Adhesives, Sealant and Paint Application Equipment Renewal

NewcoUSA Industrial Services (NIS) is an RCM-based repair facility specializing in all adhesives, paint and sealant processing equipment. Our focus is on piston pumps, gear pumps, dosers, valves, and applicators that apply urethanes, hot melt adhesives, sound deadening adhesives, butyls, and cross-linking epoxies. We have the chemicals and heat treatment equipment to break down the cross-linking materials that make it impractical to repair in the field.

As an RCM based repair center, we analyze the mode of failure, perform a root cause analysis, and build repair programs that restore equipment to like new condition. All wear parts are inspected and replaced with parts that meet the standards for tolerances, finishes, and materials. With customer input, we build a scope of work, cost model, and sustainability plan to ensure like new performance for each renewal. We then test every repair to ensure the equipment is built correctly and will perform upon installation.

From cleaning and restoring filters, nozzles, modules, pumps, applicators, and melters, to complete redesign, we enable operations to run faster, and increase reliability with less downtime and maintenance costs. Our customers count on us to deliver solutions that save them money.

When you need an outsourced repair center that can work directly or through MRO partners, NewcoUSA Industrial Services is your world class partner.

We renew and repair the following models:

GracoPyles
SlautterbackITW
NordsonMelton
Ingersoll RandMeltex
DeckerAcumeter
RobatechAnd other adhesives and sealant equipment
Why use NewcoUSA Industrial Services instead of an OEM?

As a local supplier, we are more accessible and cost-effective with quicker turnaround. As OEM equipment wears and replacement parts become obsolete, NewcoUSA Industrial Services has proven solutions to maintain and improve existing equipment to keep lines running while saving money.

Why use NewcoUSA Industrial Services instead of in-house restoration?

With more than 15 years of expertise, we have the capabilities to reengineer parts when necessary. Some parts require grinding, special cleaning, and/or platings and coatings. We can make repairs to faulty equipment design and provide a less expensive alternative without sacrificing quality and performance.

Adhesives and Sealant Processing

NewcoUSA Industrial Services is a solutions-based repair facility servicing all adhesives and sealant processing equipment. As a repair facility, we provide precision renewal of all hot melt adhesive sealant and glue application equipment to like-new condition.

From cleaning and restoring filters, nozzles, modules, pumps, applicators, and melters to complete redesign, we enable operations to run faster and increase reliability with less downtime and maintenance cost. NewcoUSA engineers surfaces to reduce sticking and corrosion problems. As a responsive and trusted partner to the adhesives and sealant processing equipment industry, our customers count on us to deliver solutions that save them money. When you need an outsourced repair center that can work directly or through MRO partners, NEWCOUSA INDUSTRIAL SERVICES is your world class partner.

We renew and repair the following models:

  • Graco
  • Slautterback
  • Nordson
  • Ingersoll Rand
  • Decker
  • Robatech
  • Pyles
  • ITW
  • Melton
  • Meltex
  • Acumeter
  • And other adhesives and sealant equipment

Drum Unloader

NewcoUSA Industrial Services is an experienced renewal center for the most popular OEM systems in use (Nordson, Ingersoll-Rand, Graco, et al). We perform routine periodic maintenance and complete rebuilds of adhesive delivery systems. We utilize OEM (or equivalent) repair kits...

Piston Pumps

NIS renews piston pumps to like-new condition according to OEM specifications. Pumps are disassembled, cleaned, inspected, repaired with OEM parts, reassembled, and tested at 1200 psi. Piston pumps are completely rebuilt using new seals, bearings, and other wear components. The...

Gear Pump

Gear pumps are renewed to like-new condition according to OEM specifications. Pumps are disassembled, cleaned, inspected, repaired with OEM parts, reground as needed, reassembled, and tested at 1200 psi. Gear pumps are completely rebuilt using new seals, bearings, and other...

Nozzles

Nozzles are restored to like-new condition, cleaned and individually inspected, saving you time and money. After inspection, nozzles are repackaged and clearly labeled according to type and orifice size.

Filters

Filters are restored to like-new condition. Using a proprietary process, the filter is cleaned, and contaminants are removed from the filter mesh. A black oxide finish is applied to the filter assembly to prevent rust. Once cleaned, a trained filter...

Hoses

NewcoUSA Industrial Services supplies new hot melt hoses in all configurations.

Melters

The renewal process for melters begins with the complete disassembly of the unit. The hydraulic section is stripped and recoated with a high performance non-stick coating. Tanks, frames, and sheet metal are stripped and cleaned of all traces of adhesive...

Applicators and Guns

All types of applicators are restored to like-new condition. The NIS process includes complete disassembly and cleaning of all components, both internal and external, followed by replacement of heaters and sensors. We renew or replace the modules. The applicator is...

Slot Die Reconditioning

Slot dies are renewed to like-new condition through a multi-step cleaning and machining process. All wear items like o-rings, modules (renewed), heaters, sensors, and all fasteners are replaced. The mouthpiece/doctor blade assembly is precision ground to remove defects and wear...

Modules

NewcoUSA Industrial Services saves you money without sacrificing quality, performance, or longevity. We promise to deliver products that work 100 percent of the time, straight out of the box. All working parts are replaced with new, OEM-equivalent or better. Our...

Manifold

NewcoUSA Industrial Services renews the entire manifold. The pressure control valve and main filter assembly are cleaned as well as the internal heat exchanger and all internal and external ports and inlets. The pressure relief valves, O-rings, and other wear...

Valve Rebuilding

NewcoUSA Industrial Services renews circulation and pressure control valves, pressure relief and safety valves, constant pressure valves, and extrusion valves. Valves are restored to like-new condition through a cleaning and renewal process that replaces all the wear components and returns...